Loipart - Marine Dishwasher EHT8M (WT55)
Back
505080

Marine Dishwasher EHT8M (WT55)

Article number: 505080

Three wash cycles. Spring balanced single skin hood. Built-in 9 kW booster heater and wetting agent injector. Capacity 80 racks/h. Supplied with one dishwashing rack and one cutlery box.

Voltage440
Phase3
Frequence (Hz)60
Loading (kW or KG/H (Steam))9,9 kW
Above Fit Floor200
Max Amps in Phase14,5
Capacity80 racks/h
Height (mm)1549
Width (mm)752
Depth (mm)755
Weight (net)106
Weight (gross)118
IP Class25
Shipping Volume1,57 m³
Noise Level<63
Hot Water SupplyG 3/4
DrainØ 20,5
Pressure (bar)2-3
Spare Part ProposalRSP/495
  80 BASKETS/HOUR CAPACITY
   SINGLE SKIN HOOD
   LOW WATER AND DETERGENT CONSUMPTION
   ELECTRONIC SYSTEM CONTROL
   Built-in atmospheric boiler
   AUTOMATIC SELF-CLEANING CYCLE
   EASY TO USE, CLEAN AND MAINTAIN
The new hood type dishwasher EHT8M is a compact, single skin tank machine with a large capacity of up to 80 racks per hour. The machine requires only 2 liters of water per washing cycle thus ensuring low energy, water, detergent and rinse aid consumption.
Main inside components as well as the outside panels are made in AISI 304 stainless steel with smooth surfaces for easy cleaning.
NHT8M can operate either in High Productivity mode or in Sanitation mode and has three wash cycles - one for lightly soiled dishes, one for normally soiled and one for heavily soiled dishes. Built-in atmospheric boiler sized to raise incoming water to a minimum of 84 °C for sanitizing rinse. Unique temperature interlock guarantees required temperatures in both the wash and final rinse. Constant temperature of 84 °C throughout the rinsing cycle regardless of the network's water pressure.  Built-in rinse aid dispenser with automatic initial and continuous cycle loading for perfect result while minimizing service and maintenance needs.
Slanted wash arms to avoid detergent-filled wash water dropping on clean dishes after the rinsing phase, thus guaranteeing ideal washing results.
Incorporated Soft Start feature to offer additional protection to more delicate items.
State-of-the-art electronic controls with built-in programming, self-diagnostics for serviceability and automatic interior self-cleaning cycle.
Automatic self-cleaning cycle and self-draining vertical wash pump and boiler to avoid bacteria proliferation.
The machine can be installed for straight or corner flow installation. All service procedures can be carried out from the front of the machine.
NHT8M is intended for connection to hot water and is equipped with flexible fill hoses. The machine is delivered with 1 rack for 18 plates and 1 box cutlery box.